Dow-Key Microwave MS-1U18S-6-ENET Instrukcja Operatora Pobierz pdf (Strona 35)

Manual (LOCAL) Operation

Recall Positions

Recall from non-volatile memory the state of the positions of all

switch ID’s configured to the matrix, saved as 1 through 30, and

set the positions of those switches.

Clear Positions

Cause all switches configured to the matrix to assume their

default position. For most switches this is position 0 (open

positions). Note that all Dow-Key switches have “open” defined,

but not all switch types have an actual open position, such as a

transfer switch. In this case, “open” means “close on its default

position 1”.

Cycle Positions

Step all switches configured to the matrix through all of their

positions. NOTE: the Cycle Position function is intended for use

at the Dow-Key factory during the assembly process. In fact,

the Cycle Position function will generate errors when

commanding a Transfer switch to switch from position 0 to

position 1, which may be ignored. For this reason, the Operator

is discouraged from exercising Cycle Positions.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 67 68

Brak uwag

Dow-Key Microwave MS-1U18S-6-ENET Instrukcja Operatora Strona 35